System Settings

0..5 CV option

By default, All CVs are ±5V, but this is not always a good option, in particular for TYPE which controls also the step in a sequence, or FAM.

Depending on your module controlling CV, some might not be able to generate negative voltages. In this case you can use the 0..5V instead.

../_images/config.png ../_images/type_cv.png

To change the CV range of TYPE or FAM, press the TYPE encoder for 2 seconds, navigate to Config, and then to either TYPE CV of FAM CV. Click the encoder and change the value to the desired range.

Screen options

Typically for shooting a video in a controlled light environment, the screen contrast might be too high, and you might not want the screen saver to trigger.

../_images/screen.png ../_images/screen_light.png

To change the contrast of the screen, navigate to Config, then Screen and finally Light. Click the encoder and change to value to the desired contrast, from 1 to 16.

../_images/screen_saver.png

To change the screen saver option, navigate to Config, then Screen and finally Scrn Saver. Click the encoder and change to value to the desired value, either On or Off.